|
Product Details:
|
| Material: | A106 Gr.A, Gr.B, Gr.C | Type: | Seamless |
|---|---|---|---|
| OD: | NPS 1/8~NPS 48 | Wall Thickness: | >=SCH10 |
| Application: | High-Temperature Service | Surface Treatment: | Varnish, Oil-dip, Passivation, Phosphating, Shot Blasting |
| Delivery Status: | Annealed, Normalized, Normalized+Tempered, Etc | ||
| Highlight: | carbon steel seamless tube,carbon steel seamless pipes |
||
Boiler Seamless Carbon Steel Pipe ASTM A106 Gr. C For High Temperature Operation
A106 is only produced as a seamless product and is available in three grades; A, B, C. There are no Types in A106 because it is produced only as a seamless product.
The ASTM A106 specification is for seamless carbon steel pipe for High-Temperature Service. It covers nominal pipe sizes (NPS) 1/8” NPS to 48 NPS”. For sizes 1- 1/2” NPS and under, A106 may be produced by two different processes; either hot finished or cold drawn. Unless otherwise specified, pipe 2″ NPS and over shall be furnished hot finished. Typical uses for A106 are for handling liquids and gasses at high temperatures and pressures in power plants, oil refineries, and industrial facilities.
Product Standard: ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Main steel grades: A,B,C
Application: Steel pipe are widely used in petroleum and chemincal industry,city construction,piping installation,etc.mechanical manufacturing,etc.
Chemical Requirements:
| Grade | Chemical Composition, % | |||||||||
| C | Mn | P | S | Si | Cr | Cu | Mo | Ni | V | |
| max | max | max | min | maxC | maxC | maxC | maxC | maxC | ||
| Grade A | 0.25A | 0.27–0.93 | 0.035 | 0.035 | 0.1 | 0.4 | 0.4 | 0.15 | 0.4 | 0.08 |
| Grade B | 0.3B | 0.29–1.06 | 0.035 | 0.035 | 0.1 | 0.4 | 0.4 | 0.15 | 0.4 | 0.08 |
| Grade C | 0.35B | 0.29–1.06 | 0.035 | 0.035 | 0.1 | 0.4 | 0.4 | 0.15 | 0.4 | 0.08 |
Mechanical Properties:
| Grade | Mechanical Properties | |
| Tensile strength, min: (Mpa) |
Yield strength, min: (Mpa) |
|
| Grade A | 333 | 205 |
| Grade B | 415 | 240 |
| Grade C | 485 | 275 |
Mark: As required.
Inspection and Test: chemical composition test, mechanical properties test(tensile, yield, elongation), process properties test(flatting, flaring, bending, hardness, impact, etc.), appearance and size test, non-destructive inspection test, hydrostastic test.
Delivery status: Annealed, normalized, normalized+Tempered, etc.
End: plain end, beveled end, threaded
End protection: plastic caps
Surface treatment: oil impregnation, paint, passivation, phosphating, shot blasting etc.
Packing: Exporting package/wooden box /as requirement.
Contact Person: Mrs. Yana Dong
Tel: 13661003712, 86-10-5712 1108, 5718 5998
Fax: 86-10-56752778
