|
Product Details:
|
| Material: | C70600 | Standard: | ASTM B111, B466-8 |
|---|---|---|---|
| Application: | Turbine Oil Coolers, Fuel Oil Heaters | Technique: | Seamless |
| Wall Thickness: | 5-350mm | OD: | 0.5-50mm Or Customised |
| Packing: | Exporting Package/wooden Box /as Requirement. | ||
| High Light: | ASTM B111 Copper Alloy Tube,C70600 Copper Alloy Tube |
||
Cu / Ni 90 10 Copper Nickel Alloy Pipe / Seamless Boiler Pipe ASTM B111 Standard
90/10 Cupro-Nickel is a copper-nickel alloy that shows good resistant to stress corrosion. Due to the addition of small amounts of iron and manganese, C706 CuNi is often used when an application will involve high-velocity seawater. 90-10 Copper-nickel demonstrates good hot and cold working properties and is readily weldable. Typical 90/10 CuNi application in the chemical and marine industries include tubes and tubesheets for condensers, evaporators and heat exchangers. 90/10 Copper-Nickel is inherently antimicrobial, making it a good choice for touch surface applications.
Dimensions:
Outer diameter:5-350mm
Wall thickness: 0.5-50mm according to the buyers' requirements,
Standard: GB/T8890/ASTM B111/JIS H3300/BS EN12451
Copper Nickel Tube Symbol:
| Grade | USA | UK | Germany | Japan | ||
| China GB | UNS | EN | DIN | No | JIS | |
| BFe10-1-1 | C70600 | CuNi10Fe1Mn | CW352H | CuNi10Fe1Mn | 2.0872 | C7060 |
Chemical Composition & Mechanical Properties:
| Standard | Chemical Composition | ||||||||||||||
| Cn | Sn | Al | As | Ni | Fe | Mn | Pb | B | P | Si | S | C | Zn | Other | |
| C70600 | Rem | 9.0-11.0 | 1.0-1.8 | 1.0 Max | 0.05Max | 1.0Max | |||||||||
Application:Copper-Nickel Alloy tube for condenser and heat ex-changers, Water Evaporators, Boiler Blow down Heat Ex changers, air coolers, Gland Steam Condensers, Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed AirInter and After Coolers, Ferrules, Oil Well Pump Liner, and Distiller etc.
Mark: As required.
Contact Person: Mrs. Yana Dong
Tel: 13661003712, 86-10-5712 1108, 5718 5998
Fax: 86-10-56752778
