|Grade:||Monel K500||Type:||Nickel Pipe, Elbow, Tee, Reducer, Tube Cap, Flange, Etc.|
|Ni (Min):||Standard||Application:||For Fluid And Gas Transport, Instrument, Chromatography, Hydra|
|Technology:||Forged, Welding , Stamping||Product Name:||Monel Uns N05500 K500 Nut Eblow Tee Reducer Forged Flange P|
monel k500 fittings and flanges,
jis fittings and flanges
Nickel Alloy Steel Monel K-500 K 500 400 W.Nr.2.4375 Nicu30Al Uns N05500 K500 Nut Eblow Tee Reducer Forged Flange
is a precipitation-hardenable Ni-Co alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding AL and Ti to the Ni-Co base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel based alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460°F.
This nickel alloy is spark resistant and non-magnetic to -200°F. However, it is possible to develop a magnetic layer on the
surface of the material during processing. Al and Co may be selectively oxidized during heating, leaving a magnetic nickel rich
film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
Doctor blades and scrapers
Oil well drill collars and cable wrap
Contact Person: Yana