Product Details:
|
Material: | X52 | Standard: | API 5L |
---|---|---|---|
OD: | 219-1219mm | Wall Thickness: | 2.11~130mm |
Application: | Transportation Of Petroleum,Sour Service | Package: | Exporting Package/ Per Customers’ Requirement |
Highlight: | carbon steel line pipe,lined steel pipe |
Line Steel Pipe API 5L X52 Caron Steel PSL1 Oil and Gas Pipeline
We offer a full range of high performance line pipe tailored to the needs of the global oil and gas industry and the unique challenges of transportation environments. Our welded and seamless line pipe is used around the world to transport crude oil, natural gas and natural gas liquids from producing fields to processing plants or refineries.
API 5L X52 PSL1 Seamless Pipe is a steel pipe and is commonly used for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for oil and gas transmission, structural application, and mechanical components.
Standard: API 5L
Main Steel Grade: X52, X65Q,X70Q,X42,X52,X65,X56Q...
Available Size Range:
OD | Thickness | ||
mm | inch | mm | SCH |
219~1219 | 8’’~48’’ | 2.11~130 | ≥SCH10 |
*If the steel grades and size you are looking for are not listed above, please contact us for further information. |
Chemical Requirements:
Chemical Composition for PSL 1 pipe with t ≤ 0.984” | |||||||
Steel Grade | Mass fraction, based on heat and product analysesa % |
||||||
C | Mn | P | S | V | Nb | Ti | |
max b | max b | max. | max. | max. | max. | max. | |
X52 | 0.28 | 1.4 | 0.03 | 0.03 | d | d | d |
a 0.50% maximum for copper; 0.50% maximum for nickel; 0.5% maximum for chromium; and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally. | |||||||
b. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for grades ≥B, but ≤X52; up to a maximum of 1.75% for grades>X52, but <X70; and up to a maximum of 2.00% for grade X70. | |||||||
c. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤0.06% | |||||||
d. The sum of the niobium, vanadium and titanium concentrations shall be ≤0.15% | |||||||
e. unless otherwise agreed. | |||||||
f. unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤0.15% |
Application: Transportation of petroleum and natural gas; Sour service; Offshore service.
Contact Person: Mrs. Yana Dong
Tel: 13661003712, 86-10-5712 1108, 5718 5998
Fax: 86-10-56752778