|Material:||C71500, C68700||Standard:||ASTM B111|
|Application:||Pressure And Heat Transmission||OD:||25.4- 273 Mm|
|Thickness:||0.5m-40mm||Packing:||Standard Sea-worthy Packing|
heat exchanger tube,
heat exchanger u tube
Seamless Copper U Tube Heat Exchanger Tube OD25.4mm 19.05mm
U Bending Tube
As the both ends fixed on the same tube sheet, the shell and the tube are separated so the U-type heat exchange can not thermal expanse, and the tube bundle can free stretch out and draw back, and cannot produce temperature stress due to the fluid temperature difference. The U-shaped bend is adopting hydraulic drive, bend, PLC control and pipe clamp to complete automatically. The synchronization of the cantilever and elbow movement , effectively prevents pipe sag in the bending process and adjusts speed in the process of operation. Using encoder positioning can ensure the Angle is precise, and can be set freely. In the process of running, it can not only display the movement, but also can display an error message, to help correct the operation and debug troubles, in order to ensure the safety of the operator and device and put an end to the hidden trouble of the production.
One Of Reference Drawing :
1. Appearance Inspection;
2. Dimensional Inspection;
3. Chemical Composition Testing;
4. Mechanical Properties Testing;
5. PWHT (Solution Annealing) of U-Bend+300mm of straight length after Bending at about 680 C Holding time 5 to 7 Seconds.
6. 100% Hydrostatic test after Bending;
7. According to client’s requirement...
Chemical Composition & Mechanical Properties:
Contact Person: Yana